JUIC Ecolo Expander applied on Hurricane Pro III


#1 HPro3 2.2mm original form.


#2 After 4 applications of the expander in 48 hours.


#3 After 72 hours.


#4 After 72 hours with regular glue
 just before putting on a blade.


#5 Re-application of the expander to used H Pro3. The rubber was used for one and a half months, three days a week, three hours a day. The expander had been coated to the rubber by the same process as in pictures from #1 to #4.  After the one and a half month usage, the expander was coated to the rubber again. This picture corresponds to #3 above.
#6 Re-application of the expander to used H Pro3.
This picture corresponds to #4 above. Strangely, I observed more dome effect on a used rubber than on a brand new one.

#7 I use a gummed tape or side tape to keep the edges attached to the blade.
#8 I use a gummed tape or side tape to keep the edges attached to the blade.

Photographed and edited by fixpoint on 11/20/2004.
Pix #5 and #6 were added on 11/24/2004.
Pix #7 and #8 were added on 12/9/2004.

Link to H Pro3 and H3 Comparison
Link to Ecolo Expander applied on Used Rubbers